Dobot Nova 2 compact 6-axis collaborative robot with 625 mm reach mounted on a benchtop workcell

Product Description

When floor space is the constraint and throughput still has to climb, the Dobot Nova 2 collaborative robot earns its spot in the cell. It is the most compact 6-axis cobot in the Nova and CR lineup, pairing a 2 kg payload with a 625 mm reach so you can automate repetitive tasks on a benchtop or inside a kiosk that has no room for a full-size arm. Built for engineers, integrators, and operations managers in retail, food service, and light manufacturing, it slots into workcells where a larger robot simply would not fit.

Weighing only 11 kg, the Nova 2 holds the smallest footprint in the Nova and CR range, turning dead bench space into productive capacity as it runs repetitive cycles shift after shift.

Key Benefits

  • Reclaim bench and kiosk space with a 625 mm working radius and an 11 kg body, so a coffee or sampling station fits where a standard cobot cannot.
  • Mount it wherever the layout demands with any-angle installation on floor, wall, ceiling, or incline, opening up overhead and side-feed cell designs.
  • Hold tight process quality with ±0.05 mm repeatability, the margin that keeps dispensing, pick-and-place, and assembly steps consistent shift after shift.
  • Keep the line moving with up to 1.6 m/s TCP speed and 135°/s on every joint, sustaining a steady cycle rate across beverage, dispensing, and pick-and-place tasks.
  • Work closely beside staff with a collaborative design that, after a risk assessment per ISO/TS 15066, can enable guard-free operation next to baristas, packers, and line operators.
  • Integrate with your controls over TCP/IP, Modbus TCP, and RS485, plus end-of-arm I/O (2 DI / 2 DO) for grippers and dispensers, to tie the cobot into existing equipment.

Ideal Applications

  • Automated coffee, tea, and beverage stations in retail and hospitality.
  • Food service prep and plating where space and labor are both tight.
  • Light-manufacturing pick-and-place, assembly, and machine tending.
  • Sampling, dispensing, and finishing tasks in compact workcells.
  • Education and lab automation that needs a small, safe 6-axis arm.

Specifications

Type Collaborative robot (6-axis)
Degrees of freedom 6
Payload 2 kg
Reach (working radius) 625 mm
Repeatability ±0.05 mm
Weight 11 kg
Max TCP speed 1.6 m/s
Joint ranges J1/J4/J5/J6 ±360°, J2 ±180°, J3 ±156°
Max joint speed 135°/s (all joints, J1–J6)
Controller input 30–60 V DC
Power consumption 100 W typical, 250 W max
Controller enclosure 200 × 120 × 55 mm, 1.3 kg
Communication / IO TCP/IP, Modbus TCP, RS485; end I/O 2 DI / 2 DO
Ingress protection Arm IP54 / controller IP20
Noise level 65 dB(A)
Robot-to-controller cable 3 m
Operating temperature 0°C to 50°C
Country of origin China

Frequently Asked Questions

What payload can the Dobot Nova 2 handle?

The Nova 2 is rated for a 2 kg payload, which suits cups, utensils, small parts, dispensing heads, and light grippers typical of food service and benchtop automation. Because 2 kg is a hard ceiling, add your part, tooling, and end-effector weight together; if the total approaches or exceeds it, size up to the Nova 5 rather than crowd the Nova 2's limit.

How far can the Nova 2 reach?

It has a 625 mm working radius. That compact envelope is what lets it fit kiosks and tight workcells while still covering a full prep or pick-and-place area.

How precise is it?

Repeatability is ±0.05 mm, tight enough for consistent dispensing, assembly, and pick-and-place across long production runs.

Can the Nova 2 be mounted at any angle, and does orientation affect payload?

Yes. The arm supports floor, wall, ceiling, and incline mounting, which is what opens up overhead and side-feed cell designs. The rated 2 kg payload is the ceiling, but because effective payload and reach into the work envelope depend on mounting orientation, speed, and the end-effector you fit, confirm your exact configuration during sizing rather than assuming the full 2 kg in every pose.

What does the controller need for power and space?

The controller runs on a 30–60 V DC input and draws about 100 W typically, 250 W maximum. Its enclosure is compact at 200 × 120 × 55 mm and weighs 1.3 kg, rated IP20, so plan it into a dry section of the cabinet or cell; the arm connects over a 3 m cable, which sets how far the controller can sit from the robot base.

Is it safe to run next to people?

The Nova 2 is a collaborative robot designed to operate alongside staff. Collaborative operation still requires a risk assessment per ISO/TS 15066, and whether any guarding is needed depends on the end-effector, speed, and application. For many light-duty tasks that assessment can clear guard-free operation at a shared counter or line, but it should be completed for each installation.

How does it connect to my equipment?

The cobot supports TCP/IP, Modbus TCP, and RS485 communication, with end-of-arm I/O of 2 digital inputs and 2 digital outputs for triggering grippers, pumps, and peripherals.

Why Buy From Robo Mechanix

  • We size compact cobots like the Nova 2 into tight benchtops, kiosks, and workcells where a full-size arm will not fit.
  • We help you choose between the Nova 2 and a higher tier such as the Nova 5 by matching the 2 kg payload ceiling and 625 mm reach to your actual parts, tooling, and gripper weight before you commit.
  • We plan the install around the Nova 2's any-angle mounting and end-of-arm I/O, tying the arm into your PLC or controls over TCP/IP, Modbus TCP, and RS485.
  • We advise on the ISO/TS 15066 risk assessment that collaborative, guard-free operation at a shared counter or line depends on.
  • We help you fit the compact IP20 controller and its 30–60 V DC supply into your cabinet or cell layout.

Need more payload or reach? Compare the Dobot Nova 5 collaborative robot when your application tops the Nova 2's 2 kg ceiling, or browse all Dobot robots.

Customers also bought